ubuntu下和windows下配置apache虚拟主机
在ubuntu下配置虚拟主机：
1. 以root用户命令行进入/etc/apache2/sites-available/目录。
2. 创建虚拟主机配置文件，以域名命名创建文件，如aaron.com,你需要创建文件aaron，
NameVirtualHost *:9011
<VirtualHost *:9001>
ServerAdmin master@test.com #邮件地址
ServerName www.aaron.com #域名
DocumentRoot /var/www/aaron #虚拟主机目录
<Directory /var/www/aaron>
Options Indexes FollowSymLinks MultiViews
AllowOverride None#如果配置url重写，则将该行改为AllowOverride All
Order allow,deny
allow from all
</Directory>
ErrorLog/var/log/apache2/www_test_com_error.log
LogLevel warn
CustomLog /var/log/apache2/www_test_com_access.log combined
ServerSignature On
</VirtualHost>
3. 命令行进/etc/apache2/目录
vi posts.conf
增加两行文字，配置相应的监听端口。
NameVirtualHost *:9001
Listen 9001
4. 在/etc/apache2下执行 a2ensite aaron
此命令是在/etc/apache2/sites-enabled目录下建立一个指向/etc/apache2/site-avaiable目录下wwwtest的软连接
执行/etc/init.d/apache2reload 执行配置文件重新载入
不报错说明配置成功
下面说在windows下如何配置apache的虚拟主机：
将Ｉｎｃｌｕｄｅ前的＃去掉
# Virtual hostsInclude conf/extra/httpd-vhosts.conf
保存修改后的ｈｔｔｐｄ．ｃｏｎｆ
４、配置ｈｔｔｐｄ－ｖｈｏｓｔｓ．ｃｏｎｆ
打开ｈｔｔｐｄ－ｖｈｏｓｔｓ．ｃｏｎｆ文件，将该文件内容指定为：
## Virtual Hosts## If you want to maintain multiple domains/hostnames on your# machine you can setup VirtualHost containers for them. Most configurations# use only name-based virtual hosts so the server doesn't need to worry about# IP addresses. This is indicated by the asterisks in the directives below.## Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/># for further details before you try to setup virtual hosts.## You may use the command line option '-S' to verify your virtual host# configuration.## Use name-based virtual hosting.#NameVirtualHost *:80## VirtualHost example:# Almost any Apache directive may go into a VirtualHost container.# The first VirtualHost section is used for all requests that do not# match a ServerName or ServerAlias in any <VirtualHost> block.#<VirtualHost *:80> ServerAdmin webmaster@dummy-host.test DocumentRoot "D:/WorkSpace/ApacheWebs2" ServerName www.test1.com ServerAlias www.dummy-host.test ErrorLog "logs/dummy-host.test-error.log" CustomLog "logs/dummy-host.test-access.log" common</VirtualHost><Directory "D:/WorkSpace/ApacheWebs2"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all</Directory><VirtualHost *:80> ServerAdmin webmaster@dummy-host2.test DocumentRoot "D:/WorkSpace/ApacheWebs3" ServerName www.test2.com ErrorLog "logs/dummy-host2.test-error.log" CustomLog "logs/dummy-host2.test-access.log" common</VirtualHost><Directory "D:/WorkSpace/ApacheWebs3"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all</Directory>
上面的配置文件中设置了两个虚拟主机，对应的服务器名及Ｗｅｂ站点目录名分别为：
ＳｅｒｖｅｒＮａｍｅ：www.test1.com －＞ D:/WorkSpace/ApacheWebs2
ＳｅｒｖｅｒＮａｍｅ：www.test2.com －＞ D:/WorkSpace/ApacheWebs3
[Directory]的标签使用来设置目录的访问权限的，如果不设置的话，会出现４０３的错误。
如果不希望站点显示目录的话，可以将[Directory]中Ｏｐｔｉｏｎｓ的Ｉｎｄｅｘｅｓ前加上［－］，即：
<Directory "D:/WorkSpace/ApacheWebs3"> Options -Indexes MultiViews AllowOverride None Order allow,deny Allow from all</Directory>
以上配置结束后，保存文件．
并重新启动Ａｐａｃｈｅ服务即可．
如果是本地调试的话，还需要修改一下Ｈｏｓｔｓ文件，否则的话。。。，你自己试试就知道了
打开c:\windows\system2\drivers\etc\Hosts文件
加入以下代码：
127.0.0.1 www.test1.com127.0.0.1 www.test2.com
打开IE，分别输入：
http://www.test1.com
http://www.test2.com
就可以看到效果了。
