小弟我使用过的Linux命令之make - 强大的编译工具

2012-07-03

我使用过的Linux命令之make - 强大的编译工具我使用过的Linux命令之make - 强大的编译工具本文链接：http:/

我使用过的Linux命令之make - 强大的编译工具
我使用过的Linux命令之make - 强大的编译工具

本文链接：http://codingstandards.iteye.com/blog/969924 ? （转载请注明出处）

用途说明

make命令是一个常用的编译命令，尤其是在开发C/C++程序时，它通过Makefile文件中描述的源程序之间的依赖关系来自动进行编译。Makefile文件是按照规定的格式编写的，文件中需要说明如何编译各个源文件并连接生成可执行文件，并要求定义源文件之间的依赖关系。在首次执行make时，会将所有相关的文件都进行编译，而在以后make时，通常是进行增量编译，即只对修改过的源代码进行编译。许多Tarball格式的开源软件，在解压之后，一般先执行./configure，然后执行make，再执行make install进行安装。在进行Java编译时，我们常用的是ant，这个ant工具的发明乃是由于James被makefile的特殊格式弄烦了，采用XML格式来描述任务之间的关系，但是ant工具借鉴了make工具的做法这是肯定的。

man make 写道 The purpose of the make utility is to determine automatically which pieces of a large program need to be recom-
piled, and issue the commands to recompile them. The manual describes the GNU implementation of make, which
was written by Richard Stallman and Roland McGrath, and is currently maintained by Paul Smith. Our examples
show C programs, since they are most common, but you can use make with any programming language whose compiler
can be run with a shell command. In fact, make is not limited to programs. You can use it to describe any
task where some files must be updated automatically from others whenever the others change.

To prepare to use make, you must write a file called the makefile that describes the relationships among files
in your program, and the states the commands for updating each file. In a program, typically the executable
file is updated from object files, which are in turn made by compiling source files.

Once a suitable makefile exists, each time you change some source files, this simple shell command:

make

suffices to perform all necessary recompilations. The make program uses the makefile data base and the last-
modification times of the files to decide which of the files need to be updated. For each of those files, it
issues the commands recorded in the data base.

make executes commands in the makefile to update one or more target names, where name is typically a program.
If no -f option is present, make will look for the makefiles GNUmakefile, makefile, and Makefile, in that
order.

Normally you should call your makefile either makefile or Makefile. (We recommend Makefile because it appears
prominently near the beginning of a directory listing, right near other important files such as README.) The
first name checked, GNUmakefile, is not recommended for most makefiles. You should use this name if you have a
makefile that is specific to GNU make, and will not be understood by other versions of make. If makefile is
‘-’, the standard input is read.

make updates a target if it depends on prerequisite files that have been modified since the target was last
modified, or if the target does not exist.

使用make进行编译的关键点就是掌握makefile的编写规则，make的手册页中说道，makefile文件可以是GNUmakefile, makefile或者Makefile，但是推荐使用Makefile，因为在列出某个目录的文件时，使用Makefile作为文件名时将被排在前面。makefile文件也像C/C++代码一样支持include方式，即把一些基本的依赖规则写在一个公共的文件中，然后其他makefile文件包含此文件。我所使用的公共makefile文件名为common.mk，是多年以前从一个高人那儿拷贝而来的，现在贡献给大家。里面有些晦涩难懂的makefile指令，但是对于使用者来说可以不必关注。思路就是将makefile所在目录的源程序找出来，然后按照依赖关系进行编译。

common.mk 写道#This is the common part for makefile

SOURCE := $(wildcard *.c) $(wildcard *.cc) $(wildcard *.cpp)
OBJS := $(patsubst %.c,%.o,$(patsubst %.cc,%.o,$(patsubst %.cpp,%.o,$(SOURCE))))
DEPS := $(patsubst %.o,%.d,$(OBJS))
MISSING_DEPS := $(filter-out $(wildcard $(DEPS)),$(DEPS))
CPPFLAGS += -MD

.PHONY : everything objs clean veryclean vc rebuild ct rl

everything : $(TARGETS)

objs : $(OBJS)

clean :
@$(RM) *.o
@$(RM) *.d

veryclean: clean
@$(RM) $(TARGETS)
@$(RM) cscope.out
@$(RM) core*

vc: veryclean

ct:
@$(RM) $(TARGETS)

rl: ct everything

rebuild: veryclean everything

ifneq ($(MISSING_DEPS),)
$(MISSING_DEPS) :
@$(RM) $(patsubst %.d,%.o,$@)
endif

-include $(DEPS)

怎么来使用这个common.mk来帮助我们编写makefile文件呢，首先我们来看一下编译成静态库的情况。见下面文件，其中的libhyfcd.a就是目标静态库文件的名称，INCS定义了依赖的包含文件路径。

makefile 写道TARGETS = $(BIN1)

BIN1 = libhyfcd.a
BIN1_OBJS = $(OBJS)
BIN1_LIBS =
BIN1_LFLAGS =
INCS = -I.. -I../../hycu2 -I/usr/include/mysql

#CC := g++
CC := gcc
CXX := gcc
CFLAGS := -g $(INCS) -Wall -D_REENTRANT -D__DECLSPEC_SUPPORTED -DOPENSSL_NO_KRB5 #-DNDEBUG
CXXFLAGS := $(CFLAGS)

include common.mk

# $(BIN1) : $(BIN1_OBJS)
# $(CC) -g -o $@ $(BIN1_LFLAGS) $^ $(addprefix -l,$(BIN1_LIBS))

$(BIN1): $(BIN1_OBJS)
ar rcs $@ $^

再来看一下编译成可执行文件的情况。见下面文件，其中msgc就是目标执行文件，BIN1_LIBS是依赖的库。

写道TARGETS = $(BIN1)

BIN1 = msgc
BIN1_OBJS = $(OBJS)
BIN1_LIBS = curses pthread
BIN1_LFLAGS = #-L../hyfc/lib
INCS = #-I../hyfc

CC := g++
CFLAGS := -g $(INCS) -Wall
#CFLAGS := -g $(INCS) -Wall -DLOG_CHECK
#CFLAGS := -g $(INCS) -Wall #-DNDEBUG
CXXFLAGS := $(CFLAGS)

include /usr/include/hyfc/common.mk

$(BIN1) : $(BIN1_OBJS)
$(CC) -g -o $@ $(BIN1_LFLAGS) $^ $(addprefix -l,$(BIN1_LIBS))

补充（2011.08.07）：列位看官，如果你关注的是Makefile的语法结构，那么不妨看参考资料【5】《GNU make中文手册》。

常用参数

格式：make

使用默认的makefile文件进行编译，按照GNUmakefile, makefile和Makefile的顺序进行查找。编译目标all。

格式：make -f makefile.debug

使用指定的makefile进行编译，此处就是makefile.debug。编译目标all。

格式：make install

编译目标install。通常用于安装软件。

格式：make clean

编译目标clean。通常用于清除目标文件.o。

格式：make veryclean

编译目标clean。通常用于清除目标文件.o以及执行文件等，意思是干净的清除掉除makefile和源程序之外的文件。

格式：make rl

编译目标rl。rl是relink的缩写，即重新链接，常用于某个依赖的库文件发生变化时强制重新链接生成执行文件。

使用示例示例一编译安装mysql++2.3.2的过程

[root@jfht setup]# ls mysql++-2.3.2.tar.gz
mysql++-2.3.2.tar.gz
[root@jfht setup]# tar zxf mysql++-2.3.2.tar.gz
[root@jfht setup]# cd mysql++-2.3.2
[root@jfht mysql++-2.3.2]# ./configure --prefix=/usr
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... yes
checking for ar... ar
checking for strip... strip
checking for nm... nm
checking if make is GNU make... yes
checking for dependency tracking method... gcc
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for gzread in -lz... yes
checking whether -lm is needed to use C math functions... no
checking whether -lsocket is needed... no
checking whether -lnsl is needed... no
checking for MySQL library directory... /usr/lib
checking for MySQL include directory... /usr/include/mysql
checking for mysql_store_result in -lmysqlclient... yes
checking for mysql_ssl_set in -lmysqlclient... yes
checking for localtime_r()... yes
checking for main in -lintl... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for STL slist extension... <ext/slist>, namespace __gnu_cxx
configure: creating ./config.status
config.status: creating Makefile
config.status: creating mysql++.spec
config.status: creating lib/Doxyfile
config.status: creating lib/mysql++.h
config.status: creating config.h
[root@jfht mysql++-2.3.2]# make && make install

此处省略较多输出。

/usr/bin/install -c -d /usr/lib
/usr/bin/install -c -m 644 libmysqlpp.so /usr/lib
/usr/bin/install -c libmysqlpp.so.2.3.2 /usr/lib
(cd /usr/lib ; rm -f libmysqlpp.so libmysqlpp.so.2; ln -s libmysqlpp.so.2.3.2 libmysqlpp.so.2; ln -s libmysqlpp.so.2 libmysqlpp.so)
/usr/bin/install -c -d /usr/include/mysql++
(cd . ; /usr/bin/install -c -m 644? lib/*.h /usr/include/mysql++)
[root@jfht mysql++-2.3.2]#

示例二使用common.mk进行编译的例子

[root@jfht src]# make
make: Nothing to be done for `everything'.
[root@jfht src]# make clean
[root@jfht src]# make
g++ -g? -Wall? -MD? -c -o compiler.o compiler.cpp
g++ -g? -Wall? -MD? -c -o file_updater.o file_updater.cpp
g++ -g? -Wall? -MD? -c -o file_util.o file_util.cpp
g++ -g? -Wall? -MD? -c -o gen_async.o gen_async.cpp
g++ -g? -Wall? -MD? -c -o gen_c.o gen_c.cpp
g++ -g? -Wall? -MD? -c -o gen_cpp.o gen_cpp.cpp
g++ -g? -Wall? -MD? -c -o gen_fmdo2.o gen_fmdo2.cpp
g++ -g? -Wall? -MD? -c -o gen_fmdo.o gen_fmdo.cpp
g++ -g? -Wall? -MD? -c -o gen_hyfc.o gen_hyfc.cpp
g++ -g? -Wall? -MD? -c -o gen_hyfcw.o gen_hyfcw.cpp
g++ -g? -Wall? -MD? -c -o gen_java.o gen_java.cpp
g++ -g? -Wall? -MD? -c -o gen_jdom.o gen_jdom.cpp
g++ -g? -Wall? -MD? -c -o gen_jt.o gen_jt.cpp
g++ -g? -Wall? -MD? -c -o gen_jxh.o gen_jxh.cpp
g++ -g? -Wall? -MD? -c -o gen_pas.o gen_pas.cpp
g++ -g? -Wall? -MD? -c -o gen_php.o gen_php.cpp
g++ -g? -Wall? -MD? -c -o gen_struts.o gen_struts.cpp
g++ -g? -Wall? -MD? -c -o gen_tag.o gen_tag.cpp
g++ -g? -Wall? -MD? -c -o gen_udpsw.o gen_udpsw.cpp
g++ -g? -Wall? -MD? -c -o gen_wsdl.o gen_wsdl.cpp
g++ -g? -Wall? -MD? -c -o gen_xml.o gen_xml.cpp
g++ -g? -Wall? -MD? -c -o msgc.o msgc.cpp
g++ -g? -Wall? -MD? -c -o string_util.o string_util.cpp
g++ -g -o msgc? compiler.o file_updater.o file_util.o gen_async.o gen_c.o gen_cpp.o gen_fmdo2.o gen_fmdo.o gen_hyfc.o gen_hyfcw.o gen_java.o gen_jdom.o gen_jt.o gen_jxh.o gen_pas.o gen_php.o gen_struts.o gen_tag.o gen_udpsw.o gen_wsdl.o gen_xml.o msgc.o string_util.o -lcurses -lpthread
cp -af msgc /usr/bin
cp -af msgc msgc.`uname -r`
[root@jfht src]# make rl
g++ -g -o msgc? compiler.o file_updater.o file_util.o gen_async.o gen_c.o gen_cpp.o gen_fmdo2.o gen_fmdo.o gen_hyfc.o gen_hyfcw.o gen_java.o gen_jdom.o gen_jt.o gen_jxh.o gen_pas.o gen_php.o gen_struts.o gen_tag.o gen_udpsw.o gen_wsdl.o gen_xml.o msgc.o string_util.o -lcurses -lpthread
cp -af msgc /usr/bin
cp -af msgc msgc.`uname -r`
[root@jfht src]#

问题思考

1. 很多自由软件中使用的Makefile是由autoconf和automake来生成的，怎么使用法？

2. Makefile中一些常见的指令的含义如何？

UNIXLINUX

小弟我使用过的Linux命令之make - 强大的编译工具