MFC下画图（不想用MOVETO和LINETO）
本人研究生在读，最近想在做一个题目。之前没用过C++也没用过MFC，只是本科学过C，上手时间不长。
————————————————————————————————————————————————
最近需要做个题目，其中涉及到去在一个dialog中画一个曲线，曲线数据已经搞定，我开始想的是直接用getwindowrect()然后用lineto()和moveto()做，但是发现用lineto 和moveto做出来的图锯齿很厉害，而且没法做小数的图，比如在（0-1）区间上的。比如做y=x^2和y=x在0-1上的曲线的时候怎么都弄不出来。
不知道有没有什么别的方法，或者是别的思路来做咧。
[解决办法]
Using Coordinate Spaces and Transformations
This section contains an example that demonstrates the following tasks:
Drawing graphics with predefined units.
Centering graphics in the application's client area.
Scaling graphics output to half its original size.
Translating graphics output 3/4 of an inch to the right.
Rotating graphics 30 degrees.
Shearing graphics output along the x-axis.
Reflecting graphics output about an imaginary horizontal axis drawn through its midpoint.
The following example was used to create the illustrations that appear earlier in this overview.
void TransformAndDraw(int iTransform, HWND hWnd)
{
HDC hDC;
XFORM xForm;
RECT rect;
// Retrieve a DC handle for the application's window.
hDC = GetDC(hWnd);
// Set the mapping mode to LOENGLISH. This moves the
// client area origin from the upper left corner of the
// window to the lower left corner (this also reorients
// the y-axis so that drawing operations occur in a true
// Cartesian space). It guarantees portability so that
// the object drawn retains its dimensions on any display.
SetGraphicsMode(hDC, GM_ADVANCED);
SetMapMode(hDC, MM_LOENGLISH);
// Set the appropriate world transformation (based on the
// user's menu selection).
switch (iTransform)
{
case SCALE: // Scale to 1/2 of the original size.
xForm.eM11 = (FLOAT) 0.5;
xForm.eM12 = (FLOAT) 0.0;
xForm.eM21 = (FLOAT) 0.0;
xForm.eM22 = (FLOAT) 0.5;
xForm.eDx = (FLOAT) 0.0;
xForm.eDy = (FLOAT) 0.0;
SetWorldTransform(hDC, &xForm);
break;
case TRANSLATE: // Translate right by 3/4 inch.
xForm.eM11 = (FLOAT) 1.0;
xForm.eM12 = (FLOAT) 0.0;
xForm.eM21 = (FLOAT) 0.0;
xForm.eM22 = (FLOAT) 1.0;
xForm.eDx = (FLOAT) 75.0;
xForm.eDy = (FLOAT) 0.0;
SetWorldTransform(hDC, &xForm);
break;
case ROTATE: // Rotate 30 degrees counterclockwise.
xForm.eM11 = (FLOAT) 0.8660;
xForm.eM12 = (FLOAT) 0.5000;
xForm.eM21 = (FLOAT) -0.5000;
xForm.eM22 = (FLOAT) 0.8660;
xForm.eDx = (FLOAT) 0.0;
xForm.eDy = (FLOAT) 0.0;
SetWorldTransform(hDC, &xForm);
break;
case SHEAR: // Shear along the x-axis with a
// proportionality constant of 1.0.
xForm.eM11 = (FLOAT) 1.0;
xForm.eM12 = (FLOAT) 1.0;
xForm.eM21 = (FLOAT) 0.0;
xForm.eM22 = (FLOAT) 1.0;
xForm.eDx = (FLOAT) 0.0;
xForm.eDy = (FLOAT) 0.0;
SetWorldTransform(hDC, &xForm);
break;
case REFLECT: // Reflect about a horizontal axis.
xForm.eM11 = (FLOAT) 1.0;
xForm.eM12 = (FLOAT) 0.0;
xForm.eM21 = (FLOAT) 0.0;
xForm.eM22 = (FLOAT) -1.0;
xForm.eDx = (FLOAT) 0.0;
xForm.eDy = (FLOAT) 0.0;
SetWorldTransform(hDC, &xForm);
break;
case NORMAL: // Set the unity transformation.
xForm.eM11 = (FLOAT) 1.0;
xForm.eM12 = (FLOAT) 0.0;
xForm.eM21 = (FLOAT) 0.0;
xForm.eM22 = (FLOAT) 1.0;
xForm.eDx = (FLOAT) 0.0;
xForm.eDy = (FLOAT) 0.0;
SetWorldTransform(hDC, &xForm);
break;
}
// Find the midpoint of the client area.
GetClientRect(hWnd, (LPRECT) &rect);
DPtoLP(hDC, (LPPOINT) &rect, 2);
// Select a hollow brush.
SelectObject(hDC, GetStockObject(HOLLOW_BRUSH));
// Draw the exterior circle.
Ellipse(hDC, (rect.right / 2 - 100), (rect.bottom / 2 + 100),
(rect.right / 2 + 100), (rect.bottom / 2 - 100));
// Draw the interior circle.
Ellipse(hDC, (rect.right / 2 -94), (rect.bottom / 2 + 94),
(rect.right / 2 + 94), (rect.bottom / 2 - 94));
// Draw the key.
Rectangle(hDC, (rect.right / 2 - 13), (rect.bottom / 2 + 113),
(rect.right / 2 + 13), (rect.bottom / 2 + 50));
Rectangle(hDC, (rect.right / 2 - 13), (rect.bottom / 2 + 96),
(rect.right / 2 + 13), (rect.bottom / 2 + 50));
// Draw the horizontal lines.
MoveToEx(hDC, (rect.right/2 - 150), (rect.bottom / 2 + 0), NULL);
LineTo(hDC, (rect.right / 2 - 16), (rect.bottom / 2 + 0));
MoveToEx(hDC, (rect.right / 2 - 13), (rect.bottom / 2 + 0), NULL);
LineTo(hDC, (rect.right / 2 + 13), (rect.bottom / 2 + 0));
MoveToEx(hDC, (rect.right / 2 + 16), (rect.bottom / 2 + 0), NULL);
LineTo(hDC, (rect.right / 2 + 150), (rect.bottom / 2 + 0));
// Draw the vertical lines.
MoveToEx(hDC, (rect.right/2 + 0), (rect.bottom / 2 - 150), NULL);
LineTo(hDC, (rect.right / 2 + 0), (rect.bottom / 2 - 16));
MoveToEx(hDC, (rect.right / 2 + 0), (rect.bottom / 2 - 13), NULL);
LineTo(hDC, (rect.right / 2 + 0), (rect.bottom / 2 + 13));
MoveToEx(hDC, (rect.right / 2 + 0), (rect.bottom / 2 + 16), NULL);
LineTo(hDC, (rect.right / 2 + 0), (rect.bottom / 2 + 150));
ReleaseDC(hWnd, hDC);
}
