SetFilePointer 超出2G定位问题，VB。
当文件的定位区域小于2g时用下面的方式就可以正确定位
SetFilePointer hdlSRCFile, NowsSart, ByVal 0&, FILE_BEGIN
当定位区域超过2g时也就是nowstart的数值大于2g时，就会溢出，看了一下网上的说明，SetFilePointer可以用高低位的方式为定位超2g的文件支持64bit
但小弟不知这个高低位应该是怎么算出来呢?
在SetFilePointer hdlSRCFile, NowsSart, ByVal 0&, FILE_BEGIN
中应该怎么写呢?例如nowstart现在的值需要为2146959360也就是说超过2g时，直接将nowstart设为该值，肯定要益出，那么设成高低位该怎么写呢。。。
还望高人们写个简单的例子就成了。。。。。 vb SetFilePointer
[解决办法]
'Example Name:Read and Write
Const MOVEFILE_REPLACE_EXISTING = &H1
Const FILE_ATTRIBUTE_TEMPORARY = &H100
Const FILE_BEGIN = 0
Const FILE_SHARE_READ = &H1
Const FILE_SHARE_WRITE = &H2
Const CREATE_NEW = 1
Const OPEN_EXISTING = 3
Const GENERIC_READ = &H80000000
Const GENERIC_WRITE = &H40000000
Private Declare Function SetVolumeLabel Lib "kernel32" Alias "SetVolumeLabelA" (ByVal lpRootPathName As String, ByVal lpVolumeName As String) As Long
Private Declare Function WriteFile Lib "kernel32" (ByVal hFile As Long, lpBuffer As Any, ByVal nNumberOfBytesToWrite As Long, lpNumberOfBytesWritten As Long, ByVal lpOverlapped As Any) As Long
Private Declare Function ReadFile Lib "kernel32" (ByVal hFile As Long, lpBuffer As Any, ByVal nNumberOfBytesToRead As Long, lpNumberOfBytesRead As Long, ByVal lpOverlapped As Any) As Long
Private Declare Function CreateFile Lib "kernel32" Alias "CreateFileA" (ByVal lpFileName As String, ByVal dwDesiredAccess As Long, ByVal dwShareMode As Long, ByVal lpSecurityAttributes As Any, ByVal dwCreationDisposition As Long, ByVal dwFlagsAndAttributes As Long, ByVal hTemplateFile As Long) As Long
Private Declare Function CloseHandle Lib "kernel32" (ByVal hObject As Long) As Long
Private Declare Function SetFilePointer Lib "kernel32" (ByVal hFile As Long, ByVal lDistanceToMove As Long, lpDistanceToMoveHigh As Long, ByVal dwMoveMethod As Long) As Long
Private Declare Function SetFileAttributes Lib "kernel32" Alias "SetFileAttributesA" (ByVal lpFileName As String, ByVal dwFileAttributes As Long) As Long
Private Declare Function GetFileSize Lib "kernel32" (ByVal hFile As Long, lpFileSizeHigh As Long) As Long
Private Declare Function GetTempFileName Lib "kernel32" Alias "GetTempFileNameA" (ByVal lpszPath As String, ByVal lpPrefixString As String, ByVal wUnique As Long, ByVal lpTempFileName As String) As Long
Private Declare Function MoveFileEx Lib "kernel32" Alias "MoveFileExA" (ByVal lpExistingFileName As String, ByVal lpNewFileName As String, ByVal dwFlags As Long) As Long
Private Declare Function DeleteFile Lib "kernel32" Alias "DeleteFileA" (ByVal lpFileName As String) As Long
Private Sub Form_Load()
'KPD-Team 1998
'URL: http://www.allapi.net/
'E-Mail: KPDTeam@Allapi.net
Dim sSave As String, hOrgFile As Long, hNewFile As Long, bBytes() As Byte
Dim sTemp As String, nSize As Long, Ret As Long
'Ask for a new volume label
sSave = InputBox("Please enter a new volume label for drive C:" + vbCrLf + " (if you don't want to change it, leave the textbox blank)")
If sSave <> "" Then
SetVolumeLabel "C:", sSave
End If
'Create a buffer
sTemp = String(260, 0)
'Get a temporary filename
GetTempFileName "C:", "KPD", 0, sTemp
'Remove all the unnecessary chr$(0)'s
sTemp = Left$(sTemp, InStr(1, sTemp, Chr$(0)) - 1)
'Set the file attributes
SetFileAttributes sTemp, FILE_ATTRIBUTE_TEMPORARY
'Open the files
hNewFile = CreateFile(sTemp, GENERIC_WRITE, FILE_SHARE_READ Or FILE_SHARE_WRITE, ByVal 0&, OPEN_EXISTING, 0, 0)
hOrgFile = CreateFile("c:\config.sys", GENERIC_READ, FILE_SHARE_READ Or FILE_SHARE_WRITE, ByVal 0&, OPEN_EXISTING, 0, 0)
'Get the file size
nSize = GetFileSize(hOrgFile, 0)
'Set the file pointer
SetFilePointer hOrgFile, Int(nSize / 2), 0, FILE_BEGIN
'Create an array of bytes
ReDim bBytes(1 To nSize - Int(nSize / 2)) As Byte
'Read from the file
ReadFile hOrgFile, bBytes(1), UBound(bBytes), Ret, ByVal 0&
'Check for errors
If Ret <> UBound(bBytes) Then MsgBox "Error reading file ..."
'Write to the file
WriteFile hNewFile, bBytes(1), UBound(bBytes), Ret, ByVal 0&
'Check for errors
If Ret <> UBound(bBytes) Then MsgBox "Error writing file ..."
'Close the files
CloseHandle hOrgFile
CloseHandle hNewFile
'Move the file
MoveFileEx sTemp, "C:\KPDTEST.TST", MOVEFILE_REPLACE_EXISTING
'Delete the file
DeleteFile "C:\KPDTEST.TST"
Unload Me
End Sub
