Introduction to the AMQP 0-9-1 Model
This guide explains the AMQP 0-9-1 model used by RabbitMQ. The?original version?was written and kindly contributed by?Michael Klishin?and edited by?Chris Duncan.
High-level Overview of AMQP 0-9-1 and the AMQP ModelWhat is AMQP?AMQP (Advanced Message Queuing Protocol) is a networking protocol that enables conforming client applications to communicate with conforming messaging middleware brokers.
Brokers and Their Rolebrokers 从producers（产生消息的应用）接收消息然后转发给consumers（处理消息的应用）。
AMQP 0-9-1 Model in BriefThe AMQP 0-9-1 Model has the following view of the world: messages are published by producers to?exchanges, which are often compared to post offices or mailboxes. Exchanges then distribute message copies to?queues?using rules called?bindings. Then AMQP brokers either deliver messages to consumers subscribed to queues, or consumers fetch/pull messages from queues on demand.
When publishing a message, producers may specify various?message attributes?(message meta-data). Some of this meta-data may be used by the broker, however, the rest of it is completely opaque to the broker and is only used by applications that receive the message.
Networks are unreliable and applications may fail to process messages therefore the AMQP model has a notion of?message acknowledgements: when a message is delivered to a consumer the consumer?notifies the broker, either automatically or as soon as the application developer chooses to do so. When message acknowledgements are in use, a broker will only completely remove a message from a queue when it receives a notification for that message (or group of messages).
In certain situations, for example, when a message cannot be routed, messages may be?returned?to producers, dropped, or, if the broker implements an extension, placed into a so-called "dead letter queue". Producers choose how to handle situations like this by publishing messages using certain parameters.
Queues, exchanges and bindings are collectively referred to as?AMQP entities.
AMQP is a Programmable ProtocolAMQP 0-9-1 is a programmable protocol in the sense that AMQP entities and routing schemes are defined by applications themselves, not a broker administrator. Accordingly, provision is made for protocol operations that declare queues and exchanges, define bindings between them, subscribe to queues and so on.
?
这给应用程序开发者带来了极大的自由，但同时他们也应该注意到潜在的定义冲突。实际上，定义冲突很少发生，一旦发生通常意味着错误的配置。应用定义了所需要的AMQP实体好必要的路由schema，并可能在不需要的时候删除它们。
?
Exchanges and Exchange TypesExchanges是一种AMQP实体，它是消息的发送对象。它接收消息并路由给零个或者多个queue。所使用的路由机制，依赖于exchange的类型和规则，又叫binds。 AMQP 0-9-1提供了四种exchange类型：
?
?
NameDefault pre-declared namesDirect exchange(Empty string) and amq.directFanout exchangeamq.fanoutTopic exchangeamq.topicHeaders exchangeamq.match (and amq.headers in RabbitMQ)?
除了类型，exchanges还定义了一些属性，最重要的属性包括：
?
Exchanges可以是durable或transient。前者当broker重启后仍然有效，而后者当broker重启后即消失。并非所有场景和用例都需要durable的exchange。
?
Default ExchangeThe default exchange is a direct exchange with no name (empty string) pre-declared by the broker. It has one special property that makes it very useful for simple applications: every queue that is created is automatically bound to it with a routing key which is the same as the queue name.
For example, when you declare a queue with the name of "search-indexing-online", the AMQP broker will bind it to the default exchange using "search-indexing-online" as the routing key. Therefore, a message published to the default exchange with the routing key "search-indexing-online" will be routed to the queue "search-indexing-online". In other words, the default exchange makes it seem like it is possible to deliver messages directly to queues, even though that is not technically what is happening.
Direct ExchangeA direct exchange delivers messages to queues based on the message routing key. A direct exchange is ideal for the unicast routing of messages (although they can be used for multicast routing as well). Here is how it works:
?
Direct exchanges are often used to distribute tasks between multiple workers (instances of the same application) in a round robin manner. When doing so, it is important to understand that, in AMQP 0-9-1, messages are load balanced between consumers and not between queues.?
A direct exchange can be represented graphically as follows:
?
fanout exchange，将消息路由给所有绑定到它的queue，路由key被完全忽略。如果有N个queue绑定到fanout exchange上，当一个消息发布到该exchange，在会为每个queue拷贝一份消息并递送给它。Fanout exchange非常适合广播消息。
?
Because a fanout exchange delivers a copy of a message to every queue bound to it, its use cases are quite similar:
?
A fanout exchange can be represented graphically as follows:
Topic exchanges根据路由key和绑定模式来转发消息到一个或多个queue，它适合于多播类型的消息。
?
Topic exchanges have a very broad set of use cases. Whenever a problem involves multiple consumers/applications that selectively choose which type of messages they want to receive, the use of topic exchanges should be considered.
Example uses:
?
Headers ExchangeA headers exchange is designed to for routing on multiple attributes that are more easily expressed as message headers than a routing key. Headers exchanges ignore the routing key attribute. Instead, the attributes used for routing are taken from the headers attribute. A message is considered matching if the value of the header equals the value specified upon binding.
It is possible to bind a queue to a headers exchange using more than one header for matching. In this case, the broker needs one more piece of information from the application developer, namely, should it consider messages with any of the headers matching, or all of them? This is what the "x-match" binding argument is for. When the "x-match" argument is set to "any", just one matching header value is sufficient. Alternatively, setting "x-match" to "all" mandates that all the values must match.
Headers exchanges can be looked upon as "direct exchanges on steroids". Because they route based on header values, they can be used as direct exchanges where the routing key does not have to be a string; it could be an integer or a hash (dictionary) for example.
?
QueuesAMQP中的queue，同其它消息队列或者任务队列中的queue的概念非常相似：它们存储消息，这些消息最终将提供给作为消费者的应用。Queue共享了exchanges的一些属性，但也具有自己额外的属性：
?
?
首先要定义Queue然后才能使用。定义Queue会创建它。如果一个queue已经存在且属性完全一样，则定义Queue的操作不起作用。如果queue名称一样，但属性不一样，则会抛出一个channel级别的异常，异常代号为406 (PRECONDITION_FAILED) 。
?
Queue NamesApplications may pick queue names or ask the broker to generate a name for them. Queue names may be up to 255 bytes of UTF-8 characters. To ask an AMQP broker to generate a unique queue name for you, pass an empty string as the queue name argument: The same generated name may be obtained by subsequent methods in the same channel by using the empty string where a queue name is expected. This works because the channel remembers the last server-generated queue name.
Queue names starting with "amq." are reserved for internal use by the broker. Attempts to declare a queue with a name that violates this rule will result in a channel-level exception with reply code 403 (ACCESS_REFUSED).
Queue DurabilityDurable queues are persisted to disk and thus survive broker restarts. Queues that are not durable are called transient. Not all scenarios and use cases mandate queues to be durable.
Note that only durable queues can be bound to durable exchanges. This guarantees that it is possible to restore bindings on broker restart.
Durability of a queue does not make?messages?that are routed to that queue durable. If broker is taken down and then brought back up, durable queue will be re-declared during broker startup, however, only?persistent?messages will be recovered.
BindingsBindings are rules that exchanges use (among other things) to route messages to queues. To instruct an exchange E to route messages to a queue Q, Q has to be?bound?to E. Bindings may have an optional?routing key?attribute used by some exchange types. The purpose of the routing key is to select certain messages published to an exchange to be routed the bound queue. In other words, the routing key acts like a filter.
To draw an analogy:
Having this layer of indirection enables routing scenarios that are impossible or very hard to implement using publishing directly to queues and also eliminates certain amount of duplicated work application developers have to do.
If AMQP message cannot be routed to any queue (for example, because there are no bindings for the exchange it was published to) it is either dropped or returned to the publisher, depending on message attributes the publisher has set.
Consumers?
仅仅把消息保存在queue中是没有意义的，必须有应用来消费它们。AMQP提供了两种方式让应用来消费消息：
?
使用"push API"，应用必须标明想从哪个queue 获取消息。此时，我们说queue上注册了一个消费者，或者说一个消费者订阅了一个queue。可以在一个queue上注册多个消费者，也可以注册一个排他性的消费者（当它在消费的时候，不允许其它消费者来获取消息）。
每个消费者都有一个唯一的consumer tag，可用于取消订阅消息。consumer tag 实质是一个字符串。
Message Acknowledgements消费者，可能在偶然情况下，处理消息失败，或者有时候它会异常退出。在网络故障情况下，也可能导致问题。这带来一个问题：什么情况下，broker可以确信能从queue中删除一个消息？ AMQP规范提供了两种选择：
?
前者称作自动应答模型，后者称作显示应答模型。采用后一种模型，消费者需要决定何时发送应答。可以在收到消息后立刻应答，也可以在将消息持续化到存储系统但尚没有处理时，或者是在处理结束后。
?
如果消费者挂掉了，来不及应答，broker可以讲消息投递给其它消费者，或者等待其它消费者注册上来再重新投递。
Rejecting MessagesWhen a consumer application receives a message, processing of that message may or may not succeed. An application can indicate to the broker that message processing has failed (or cannot be accomplished at the time) by rejecting a message. When rejecting a message, an application can ask the broker to discard or requeue it. When there is only one consumer on a queue, make sure you do not create infinite message delivery loops by rejecting and requeueing a message from the same consumer over and over again.
Negative AcknowledgementsMessages are rejected with the?basic.reject?AMQP method. There is one limitation that?basic.reject?has: there is no way to reject multiple messages as you can do with acknowledgements. However, if you are using RabbitMQ, then there is a solution. RabbitMQ provides an AMQP 0-9-1 extension known as?negative acknowledgements?or?nacks. For more information, please refer to the?Rabbit-specific extensions.
Prefetching MessagesFor cases when multiple consumers share a queue, it is useful to be able to specify how many messages each consumer can be sent at once before sending the next acknowledgement. This can be used as a simple load balancing technique or to improve throughput if messages tend to be published in batches. For example, if a producing application sends messages every minute because of the nature of the work it is doing.
Note that RabbitMQ only supports channel-level prefetch-count, not connection or size based prefetching.
Message Attributes and PayloadMessages in the AMQP model have?attributes. Some attributes are so common that the AMQP 0-9-1 specification defines them and application developers do not have to think about the exact attribute name. Some examples are
Some attributes are used by AMQP brokers, but most are open to interpretation by applications that receive them. Some attributes are optional and known as?headers. They are similar to X-Headers in HTTP. Message attributes are set when a message is published.
AMQP messages also have a?payload?(the data that they carry), which AMQP brokers treat as an opaque byte array. The broker will not inspect or modify the payload. It is possible for messages to contain only attributes and no payload. It is common to use serialisation formats like JSON, Thrift, Protocol Buffers and MessagePack to serialize structured data in order to publish it as the message payload. AMQP peers typically use the "content-type" and "content-encoding" fields to communicate this information, but this is by convention only.
Messages may be published as persistent, which makes AMQP broker persist them to disk. If the server is restarted the system ensures that received persistent messages are not lost. Simply publishing message to a durable exchange or the fact that queue(s) they are routed to is durable doesn't make messages persistent: it all depends on persistence mode of the messages itself. Publishing messages as persistent affects performance (just like with data stores, durability comes at a certain cost in performance).
Message AcknowledgementsSince networks are unreliable and applications fail, it is often necessary to have some kind of processing acknowledgement. Sometimes it is only necessary to acknowledge the fact that a message has been received. Sometimes acknowledgements mean that a message was validated and processed by a consumer, for example, verified as having mandatory data and persisted to a data store or indexed.
This situation is very common, so AMQP 0-9-1 has a built-in feature called?message acknowledgements?(sometimes referred to as?acks) that consumers use to confirm message delivery and/or processing. If an application crashes (AMQP broker notices this when connection is closed), if an acknowledgement for a message was expected but not received by the AMQP broker, the message is re-queued (and possibly immediately delivered to another consumer, if any exists).
Having acknowledgements built into the protocol helps developers to build more robust software.
AMQP 0-9-1 Methods?
AMQP 0-9-1由一组methods组成。方法是一种操作（类似于HTTP 方法），而跟 OOP完全无关。方法被组合成类。类是方法逻辑上的组合。
下面看看 exchange class （一组跟exchanges相关的操作），它包含了以下操作：
?
?
?
（注意，RabbitMQ针对exchange class，定义了自己的扩展的方法，本文不予讨论）。
?
The operations above form logical pairs:?exchange.declare?and?exchange.declare-ok,?exchange.delete?and?exchange.delete-ok. These operations are "requests" (sent by clients) and "responses" (sent by brokers in response to the aforementioned "requests").
As an example, the client asks the broker to declare a new exchange using the?exchange.declare?method:
As shown on the diagram above,?exchange.declare?carries several?parameters. They enable the client to specify exchange name, type, durability flag and so on.
If the operation succeeds, the broker responds with the?exchange.declare-ok?method:
exchange.declare-ok?does not carry any parameters except for the channel number (channels will be described later in this guide).
The sequence of events is very similar for another method pair on the AMQP?queue?class:?queue.declare?and?queue.declare-ok:
Not all AMQP methods have counterparts. Some (basic.publish?being the most widely used one) do not have corresponding "response" methods and some others (basic.get, for example) have more than one possible "response".
Connections?
APMQ连接是长连接，它是一种基于TCP的应用层协议。它使用认证，且可通过TLS(SSL)来保护安全。若应用不再需要连接到一个AMQP broker，则它应该优雅的关闭连接，而不是粗暴的直接关闭底层的TCP连接。
?
Channels有些应用需要与一个broker建立多个连接。但是，同时维持大量TCP连接是不明智的，那样会耗费系统资源，同时也对防火墙配置带来麻烦。 AMQP连接是可复用的，可以把channels看做“共享单条TCP连接的轻量级连接”。
对于使用多线程/多进程的应用，通常是为每个线程/进程打开一个channel，而不是在它们之间共享channel.
在一个channel内的通信，是与其它channel内的通信完全隔离的。因此，每个AMQP操作消息都携带一个channel number，指定了该操作作用于哪个channel。
?
?
Virtual HostsTo make it possible for a single broker to host multiple isolated "environments" (groups of users, exchanges, queues and so on), AMQP includes the concept of?virtual hosts?(vhosts). They are similar to virtual hosts used by many popular Web servers and provide completely isolated environments in which AMQP entities live. AMQP clients specify what vhosts they want to use during AMQP connection negotiation.
AMQP is ExtensibleAMQP 0-9-1 has several extension points:
These features make the AMQP 0-9-1 Model even more flexible and applicable to a very broad range of problems.
AMQP 0-9-1 Clients EcosystemThere are?many AMQP 0-9-1 clients?for many popular programming languages and platforms. Some of them follow AMQP terminology closely and only provide implementation of AMQP methods. Some others have additional features, convenience methods and abstractions. Some of the clients are asynchronous (non-blocking), some are synchronous (blocking), some support both models. Some clients support vendor-specific extensions (for example, RabbitMQ-specific extensions).
Because one of the main AMQP goals is interoperability, it is a good idea for developers to understand protocol operations and not limit themselves to terminology of a particular client library. This way communicating with developers using different libraries will be significantly easier.
?
