为什么vxworks启动后会打印出一些杂乱的信息呢？
各位高手，我把我的应用程序编译进内核后，启动vxworks后，经常会打印出一些杂乱的信息，甚至丢失了命令提示符，比如下面这个（我在RAM里建立了文件系统，并建立临时文件，最后销毁）：
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2002
CPU: XPedite6201MPC7448 (2.2). Processor #0.
Memory Size: 0x40000000. BSP version 1.2/3e.
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Retrieved old volume params with -> %33 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number f80000
Label:" " ...
Disk with 2048 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 2028 clusters, 6 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 12
Root dir entries 112, sysId VXDOS12 , serial number f80000
Label:" " ...
我要再按回车才会出现->提示符，请问上面信息什么意思？怎样才能去掉这些东西呢？
[解决办法]
每次都有这种情况？
[解决办法]
执行了 make menuconfig 之后，并没有见到有你要添加的应用程序那一项？
[解决办法]
调试信息？
在代码里面查找那些字符串啊，诸如“tRootTask”“usbBulkDevInit”
[解决办法]
修改BSP目录下的config.h，加入#undef INCLUDE_WDB_BANNER
