小读spring ioc源码（4）——BeanDefinitionReader

小读spring ioc源码（四）——BeanDefinitionReader
上一篇博客说到，ApplicationContext将解析BeanDefinition的工作委托给BeanDefinitionReader组件，这篇就接着分析一下BeanDefinition的解析过程

protected void loadBeanDefinitions(XmlBeanDefinitionReader reader) throws IOException {String[] configLocations = getConfigLocations();if (configLocations != null) {for (String configLocation : configLocations) {reader.loadBeanDefinitions(configLocation);}}}

这是解析过程最外围的代码，过程是很清晰的，首先要获取到配置文件的路径，这在之前已经完成了。然后将每个配置文件的路径，作为参数传给BeanDefinitionReader的loadBeanDefinitions方法里

public int loadBeanDefinitions(String location) throws BeanDefinitionStoreException {return loadBeanDefinitions(location, null);}

这个方法又调用了重载方法

public int loadBeanDefinitions(String location, Set<Resource> actualResources) throws BeanDefinitionStoreException {ResourceLoader resourceLoader = getResourceLoader();if (resourceLoader == null) {throw new BeanDefinitionStoreException("Cannot import bean definitions from location [" + location + "]: no ResourceLoader available");}if (resourceLoader instanceof ResourcePatternResolver) {// Resource pattern matching available.try {Resource[] resources = ((ResourcePatternResolver) resourceLoader).getResources(location);int loadCount = loadBeanDefinitions(resources);if (actualResources != null) {for (Resource resource : resources) {actualResources.add(resource);}}if (logger.isDebugEnabled()) {logger.debug("Loaded " + loadCount + " bean definitions from location pattern [" + location + "]");}return loadCount;}catch (IOException ex) {throw new BeanDefinitionStoreException("Could not resolve bean definition resource pattern [" + location + "]", ex);}}else {// Can only load single resources by absolute URL.Resource resource = resourceLoader.getResource(location);int loadCount = loadBeanDefinitions(resource);if (actualResources != null) {actualResources.add(resource);}if (logger.isDebugEnabled()) {logger.debug("Loaded " + loadCount + " bean definitions from location [" + location + "]");}return loadCount;}}

这个方法就比较长了，不过分析一下，流程还是很清晰的。

BeanDefinitionReader不能直接加载配置文件，需要把配置文件封装成Resource，然后才能调用重载方法loadBeanDefinitions()。所以这个方法其实就是2段，第一部分是委托ResourceLoader将配置文件封装成Resource，第二部分是调用loadBeanDefinitions()，对Resource进行解析

而这里的ResourceLoader，就是前面的XmlWebApplicationContext，因为ApplicationContext接口，是继承自ResourceLoader接口的

Resource也是一个接口体系，在web环境下，这里就是ServletContextResource

接下来进入重载方法loadBeanDefinitions()

public int loadBeanDefinitions(Resource... resources) throws BeanDefinitionStoreException {Assert.notNull(resources, "Resource array must not be null");int counter = 0;for (Resource resource : resources) {counter += loadBeanDefinitions(resource);}return counter;}

这里就不用说了，就是把每一个Resource作为参数，继续调用重载方法。读spring源码，会发现重载方法特别多

public int loadBeanDefinitions(Resource resource) throws BeanDefinitionStoreException {return loadBeanDefinitions(new EncodedResource(resource));}

还是重载方法，不过这里对传进来的Resource又进行了一次封装，变成了编码后的Resource，问题不大

public int loadBeanDefinitions(EncodedResource encodedResource) throws BeanDefinitionStoreException {Assert.notNull(encodedResource, "EncodedResource must not be null");if (logger.isInfoEnabled()) {logger.info("Loading XML bean definitions from " + encodedResource.getResource());}Set<EncodedResource> currentResources = this.resourcesCurrentlyBeingLoaded.get();if (currentResources == null) {currentResources = new HashSet<EncodedResource>(4);this.resourcesCurrentlyBeingLoaded.set(currentResources);}if (!currentResources.add(encodedResource)) {throw new BeanDefinitionStoreException("Detected cyclic loading of " + encodedResource + " - check your import definitions!");}try {InputStream inputStream = encodedResource.getResource().getInputStream();try {InputSource inputSource = new InputSource(inputStream);if (encodedResource.getEncoding() != null) {inputSource.setEncoding(encodedResource.getEncoding());}return doLoadBeanDefinitions(inputSource, encodedResource.getResource());}finally {inputStream.close();}}catch (IOException ex) {throw new BeanDefinitionStoreException("IOException parsing XML document from " + encodedResource.getResource(), ex);}finally {currentResources.remove(encodedResource);if (currentResources.isEmpty()) {this.resourcesCurrentlyBeingLoaded.remove();}}}

这个就是loadBeanDefinitions()的最后一个重载方法，比较长，可以拆看来看

Assert.notNull(encodedResource, "EncodedResource must not be null");if (logger.isInfoEnabled()) {logger.info("Loading XML bean definitions from " + encodedResource.getResource());}Set<EncodedResource> currentResources = this.resourcesCurrentlyBeingLoaded.get();if (currentResources == null) {currentResources = new HashSet<EncodedResource>(4);this.resourcesCurrentlyBeingLoaded.set(currentResources);}if (!currentResources.add(encodedResource)) {throw new BeanDefinitionStoreException("Detected cyclic loading of " + encodedResource + " - check your import definitions!");}

这第一部分，是处理线程相关的工作，把当前正在解析的Resource，设置为当前Resource

try {InputStream inputStream = encodedResource.getResource().getInputStream();try {InputSource inputSource = new InputSource(inputStream);if (encodedResource.getEncoding() != null) {inputSource.setEncoding(encodedResource.getEncoding());}return doLoadBeanDefinitions(inputSource, encodedResource.getResource());}finally {inputStream.close();}}

这里是第二部分，是核心，首先把Resource还原为InputStream，然后调用实际解析的方法doLoadBeanDefinitions()。可以看到，这种命名方式是很值得学习的，一种业务方法，比如parse()，可能需要做一些外围的工作，然后实际解析的方法，可以命名为doParse()。这种doXXX()的命名方法，在很多开源框架中都有应用，比如logback等

接下来就看一下这个doLoadBeanDefinitions()方法

protected int doLoadBeanDefinitions(InputSource inputSource, Resource resource)throws BeanDefinitionStoreException {try {int validationMode = getValidationModeForResource(resource);Document doc = this.documentLoader.loadDocument(inputSource, getEntityResolver(), this.errorHandler, validationMode, isNamespaceAware());return registerBeanDefinitions(doc, resource);}catch (BeanDefinitionStoreException ex) {throw ex;}catch (SAXParseException ex) {throw new XmlBeanDefinitionStoreException(resource.getDescription(),"Line " + ex.getLineNumber() + " in XML document from " + resource + " is invalid", ex);}catch (SAXException ex) {throw new XmlBeanDefinitionStoreException(resource.getDescription(),"XML document from " + resource + " is invalid", ex);}catch (ParserConfigurationException ex) {throw new BeanDefinitionStoreException(resource.getDescription(),"Parser configuration exception parsing XML from " + resource, ex);}catch (IOException ex) {throw new BeanDefinitionStoreException(resource.getDescription(),"IOException parsing XML document from " + resource, ex);}catch (Throwable ex) {throw new BeanDefinitionStoreException(resource.getDescription(),"Unexpected exception parsing XML document from " + resource, ex);}}

抛开处理异常的若干catch体，只看实体部分

int validationMode = getValidationModeForResource(resource);Document doc = this.documentLoader.loadDocument(inputSource, getEntityResolver(), this.errorHandler, validationMode, isNamespaceAware());return registerBeanDefinitions(doc, resource);

这个流程也是很清晰的，首先确认校验模式，然后委托documentLoader，将InputStream读取成标准的Document对象，然后调用registerBeanDefinitions()，进行解析工作

这里注意两点

首先这个Document对象，是W3C定义的标准XML对象，跟spring无关。

其次这个registerBeanDefinitions方法，我觉得命名有点误导性。因为这个时候实际上解析还没有开始，怎么直接就注册了呢。比较好的命名，我觉得可以是parseAndRegisterBeanDefinitions()

接下来就看一下这个核心方法registerBeanDefinitions

public int registerBeanDefinitions(Document doc, Resource resource) throws BeanDefinitionStoreException {BeanDefinitionDocumentReader documentReader = createBeanDefinitionDocumentReader();documentReader.setEnvironment(this.getEnvironment());int countBefore = getRegistry().getBeanDefinitionCount();documentReader.registerBeanDefinitions(doc, createReaderContext(resource));return getRegistry().getBeanDefinitionCount() - countBefore;}

这个方法也很清楚，同样要注意2个事

首先，BeanDefinitionReader组件，也不是自己完成解析的，它要委托给BeanDefinitionDocumentReader来完成（BeanDefinitionDocumentReader还会有一次委托）。

其次，可以看到实际解析的方法registerBeanDefinitions()前后，还各有一个计数，这里调用了getRegistry()方法，来得到一个BeanRegistry。这里实际取到的是DefaultListableBeanFactory，因为这个类实现了BeanRegistry接口。（DefaultListableBeanFactory是一个非常重要的类，它不仅是BefanFactory的默认实现，而且大部分的ApplicationContext实现，内部都持有一个它的实例）

接下来就进入registerBeanDefinitions()方法看看

public void registerBeanDefinitions(Document doc, XmlReaderContext readerContext) {this.readerContext = readerContext;logger.debug("Loading bean definitions");Element root = doc.getDocumentElement();doRegisterBeanDefinitions(root);}

处理完外围事务之后，进入doRegisterBeanDefinitions()方法，这种命名规范，上文已经介绍过了

protected void doRegisterBeanDefinitions(Element root) {String profileSpec = root.getAttribute(PROFILE_ATTRIBUTE);if (StringUtils.hasText(profileSpec)) {Assert.state(this.environment != null, "environment property must not be null");String[] specifiedProfiles = StringUtils.tokenizeToStringArray(profileSpec, BeanDefinitionParserDelegate.MULTI_VALUE_ATTRIBUTE_DELIMITERS);if (!this.environment.acceptsProfiles(specifiedProfiles)) {return;}}// any nested <beans> elements will cause recursion in this method. In// order to propagate and preserve <beans> default-* attributes correctly,// keep track of the current (parent) delegate, which may be null. Create// the new (child) delegate with a reference to the parent for fallback purposes,// then ultimately reset this.delegate back to its original (parent) reference.// this behavior emulates a stack of delegates without actually necessitating one.BeanDefinitionParserDelegate parent = this.delegate;this.delegate = createHelper(readerContext, root, parent);preProcessXml(root);parseBeanDefinitions(root, this.delegate);postProcessXml(root);this.delegate = parent;}

这个方法也比较长，拆开来看

String profileSpec = root.getAttribute(PROFILE_ATTRIBUTE);if (StringUtils.hasText(profileSpec)) {Assert.state(this.environment != null, "environment property must not be null");String[] specifiedProfiles = StringUtils.tokenizeToStringArray(profileSpec, BeanDefinitionParserDelegate.MULTI_VALUE_ATTRIBUTE_DELIMITERS);if (!this.environment.acceptsProfiles(specifiedProfiles)) {return;}}

如果配置文件中<beans>元素，配有profile属性，就会进入这一段，不过一般都是不会的

BeanDefinitionParserDelegate parent = this.delegate;this.delegate = createHelper(readerContext, root, parent);preProcessXml(root);parseBeanDefinitions(root, this.delegate);postProcessXml(root);this.delegate = parent;

然后这里创建了BeanDefinitionParserDelegate对象，preProcessXml()和postProcessXml()都是空方法，核心就是parseBeanDefinitions()方法。这里又把BeanDefinition解析和注册的工作，委托给了BeanDefinitionParserDelegate对象，在parseBeanDefinitions()方法中完成

总的来说，解析工作的委托链是这样的：XmlWebApplicationContext-->XmlBeanDefinitionReader-->DefaultBeanDefinitionDocumentReader-->BeanDefinitionParserDelegate

XmlWebApplicationContext作为最外围的组件，发起解析的请求。

XmlBeanDefinitionReader将配置文件路径封装为Resource，读取出w3c定义的Document对象，然后委托给DefaultBeanDefinitionDocumentReader。

DefaultBeanDefinitionDocumentReader就开始做实际的解析工作了，但是涉及到bean的具体解析，它还是会继续委托给BeanDefinitionParserDelegate来做

接下来在parseBeanDefinitions()方法中发生了什么，以及BeanDefinitionParserDelegate类完成的工作，在下一篇博客中继续说明

查看更多 下一篇