AIX 查看网卡是否做绑定
可以通过lsattr命令查看网卡是否做过绑定，以下仅作记录
引用# lsattr -El ent2
adapter_names ent0 EtherChannel Adapters True
alt_addr 0x000000000000 Alternate EtherChannel Address True
auto_recovery yes Enable automatic recovery after failover True
backup_adapter ent1 Adapter used when whole channel fails True
hash_mode default Determines how outgoing adapter is chosen True
mode standard EtherChannel mode of operation True
netaddr 0 Address to ping True
noloss_failover yes Enable lossless failover after ping failure True
num_retries 3 Times to retry ping before failing True
retry_time 1 Wait time (in seconds) between pings True
use_alt_addr no Enable Alternate EtherChannel Address True
use_jumbo_frame no Enable Gigabit Ethernet Jumbo Frames True
# lsattr -El ent1
alt_addr 0x000000000000 Alternate Ethernet address True
flow_ctrl no Request Transmit and Receive Flow Control True
jumbo_frames no Request Transmit and Receive Jumbo Frames True
large_receive yes Enable receive TCP segment aggregation True
large_send yes Enable hardware Transmit TCP segmentation True
media_speed Auto_Negotiation Requested media speed True
multicore yes Enable Multi-Core Scaling True
rx_cksum yes Enable hardware Receive checksum True
rx_cksum_errd yes Discard RX packets with checksum errors True
rx_clsc 1G Enable Receive interrupt coalescing True
rx_clsc_usec 95 Receive interrupt coalescing window True
rx_coalesce 16 Receive packet coalescing True
rx_q1_num 8192 Number of Receive queue 1 WQEs True
rx_q2_num 4096 Number of Receive queue 2 WQEs True
rx_q3_num 2048 Number of Receive queue 3 WQEs True
tx_cksum yes Enable hardware Transmit checksum True
tx_isb yes Use Transmit Interface Specific Buffers True
tx_q_num 512 Number of Transmit WQEs True
use_alt_addr no Enable alternate Ethernet address True
