求助 ARM 9 + 2410 + wince 4.2
我下载完镜像重启一下:
Windows CE Firmware Init
INFO: Initializing system interrupts...
INFO: Initializing system clock(s)...
INFO: Initializing driver globals area...
SDMMC config current rGPGCON: 10a
SDMMC config set rGPGCON: 20010a
SDMMC config Init Done.
+OEMKitlInit
+InitEther
::: OEMEthInit() IP Address : 192.168.0.12
::: OEMEthInit() Netmask : 255.255.255.0
VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
Tx buffer [0xAE02F8E0] to [0xAE0338E0].
Rx buffer [0xAE02B8C0] to [0xAE02F8C0].
VBridge:: NK add MAC: [12-13-12-15-19-32]
Using device name: SMDK24106450
Device SMDK24106450, IP 192.168.0.12, Port 981
Calling EdbgInitDHCP
-InitEther
-OEMKitlInit
到这里就不动了。这是什么原因呢?
[解决办法]
你编译nk的时候,在project设置里,把enable kitl选择去掉。