首页 诗词 字典 板报 句子 名言 友答 励志 学校 网站地图
当前位置: 首页 > 教程频道 > 嵌入开发 > WinCE >

请问关于wince6的异常“Could not find file rsaenh.dll”

2012-02-07 
请教关于wince6的错误“Could not find file rsaenh.dll”当我执行:“rebuild and clean sysgen”的时候:出现

请教关于wince6的错误“Could not find file rsaenh.dll”
当我执行:“rebuild and clean sysgen”的时候:
出现如下错误:
keimg: Check for D:\WINCE600\OSDesigns\MainStoneIIITestNew\MainStoneIIITestNew\RelDir\MAINSTONEIII_ARMV4I_Release\PreRomImage.bat to run.
makeimg: Change directory to D:\WINCE600.
makeimg: run command: cmd /C D:\WINCE600\OSDesigns\MainStoneIIITestNew\MainStoneIIITestNew\RelDir\MAINSTONEIII_ARMV4I_Release\PreRomImage.bat romimage D:\WINCE600\OSDesigns\MainStoneIIITestNew\MainStoneIIITestNew\RelDir\MAINSTONEIII_ARMV4I_Release\ce.bib

PREROMIMAGE processing...

makeimg: run command: romimage D:\WINCE600\OSDesigns\MainStoneIIITestNew\MainStoneIIITestNew\RelDir\MAINSTONEIII_ARMV4I_Release\ce.bib

Windows CE ROM Image Builder v4.0.120 Copyright (c) Microsoft Corporation
Built: Jul 25 2006 16:37:02

Q flag encountered, adding module k.fatutil.dll
Q flag encountered, adding module k.toolhelp.dll
Q flag encountered, adding module k.prnport.dll
Q flag encountered, adding module k.prnerr.dll
Q flag encountered, adding module k.ceddk.dll
Q flag encountered, adding module k.ws2.dll
Q flag encountered, adding module k.wspm.dll
Q flag encountered, adding module k.nspm.dll
Q flag encountered, adding module k.ssllsp.dll
Q flag encountered, adding module k.schannel.dll
Q flag encountered, adding module k.dhcpsrv.dll
Q flag encountered, adding module k.mmtimer.dll
Q flag encountered, adding module k.secur32.dll
Q flag encountered, adding module k.msasn1.dll
Q flag encountered, adding module k.crypt32.dll
Q flag encountered, adding module k.winsock.dll
Q flag encountered, adding module k.spnego.dll
Error: Could not find file 'D:\WINCE600\OSDesigns\MainStoneIIITestNew\MainStoneIIITestNew\RelDir\MAINSTONEIII_ARMV4I_Release\rsaenh.dll' on disk
rsaenh.dll D:\WINCE600\OSDesigns\MainStoneIIITestNew\MainStoneIIITestNew\RelDir\MAINSTONEIII_ARMV4I_Release\rsaenh.dll NK SH 

Error: failed setting line
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).

BLDDEMO: MainStoneIIITestNew build complete.

MainStoneIIITestNew - 4 error(s), 141 warning(s)
========== 生成: 0 成功或最新,1 失败,0 被跳过 ==========

我在上次编译成功和这次编译失败之间,只做了删除驱动的操作,只修改了驱动中的dir 和platform.bib、 platform.reg 
请问这个错误是什么原因造成的??
谢谢

[解决办法]
这么巧,我昨天也遇到这个问题,之前一直都是可以的,我再试一下。
[解决办法]

探讨

引用:
你看看你的release目录下面的ce.bib到底改到了没有,如果没有改到就clean了再拷贝一下


请问:
“如果没有改到就clean了再拷贝一下”
这句话怎么理解??
ce.bib在哪能拷贝??

热点排行